The working principle of the loader: The engine is a machine that connects the gearbox and the rudder. There is an important mechanism on the machine called the coordinate positioning device. When the rudder and the coordinate positioning device point in one direction, the rotation speed difference of the two wheels can pass through the reverse To adjust the direction of the car's steering. The loader is accomplished by continuously swinging the rudder through the coordinate positioning device of the loader, which is a kind of human-controlled power steering operation. The driving track of the loader: The driving track of the loader is generally determined by the engine speed and the rudder speed, the steering angle (ape) and the deviation of the steering angle (cros). By comparing the difference between the three, the trajectory (loading line position) of the loader can be clearly determined, and the trajectory and route of each segment of the line can be known through this road. Different wheel combinations form a specific driving track. If the wheels of the loader are overly dispersed and the turning radius of the vehicle is small, the steering radius of the rudder will deviate outward when loading; if the wheels of the loader are excessively vertical, the turning radius of the rudder will be Deviation inward. The cruising of the loader: The cruising of the loader is that the wheels of the loader do not shake, just like the wheels are moving. When cruising, the driver can see the turning radius and route of the rudder, which is determined as the turning radius of his wheels. In general, the turning radius of the rudder is larger than the turning radius of the wheels, while the turning radius of the loader rudder is smaller than the turning radius of the wheels. Reversing of the loader: the larger the rudder turning radius, the greater the ratio of the rudder turning radius outwards during loading, and the larger the ratio of outward deviation of the loader when reversing. At this time, it needs to be switched to the reverse direction, and so on. The driving track of the loader: each track is the steering angle generated by the rudder. The steering angle of the loader is recorded with the value of the larger track as the coordinate quantity, and then we use the discrete integral formula to calculate whether it is appropriate, if of course it is appropriate , Analyze the driving trajectory and extend the equation. The steering angle of the loader: the larger the steering radius of the rudder, the greater the proportion of the rudder steering radius deviating outward during loading, and the greater the proportion of inward deviation of the rudder steering radius during loading. At this time, it is necessary to switch to the reverse direction, and so on. Back and forth. Loader swing rudder: A directional dynamic trajectory is generated by the rudder. The turning radius of the rudder depends on the rudder speed. The larger dynamic trajectory value is used as the coordinate, and the dynamic trajectory of the rudder is analyzed and solved. The following question: the time required to adjust the rudder to full hit: the greater the output steering angle of the rudder, the greater the proportion of the loader's steering radius deviating outward, and the greater the proportion of steering radius deviating inward, and the steering radius needs to be adjusted appropriately. Loader steering radius: The steering radius of the rudder depends on the speed of the rudder. The rudder uses the larger steering radius as the coordinate system to calculate the steering radius of the loader. Adjust the steering radius of the loader to adjust the loader's trajectory. Prevent the loader from instability: After the rudder swings, the loader will lose stability. The instability of the loader is caused by the irregular steering angle and radius. It is difficult to solve the instability problem of the loader by adjusting the rudder of the loader. The trajectory of the loader What effect does the steering angle generated by the loader have on the driving trajectory?
The Working Principle Of The Loader
Aug 14, 2021
Send Inquiry
Latest News
Contact Us
- Request Call:
-
-
Manager Wang:+86 19953645362
-
Manager Liu:+86 18615089090 -
-
Manager Ma:+86 18765666828
-
-
Manager Wang:+86 13864698681
- E-mail: http://karl@shanmon.com










